Mike Ault's thoughts on various topics, Oracle related and not. Note: I reserve the right to delete comments that are not contributing to the overall theme of the BLOG or are insulting or demeaning to anyone. The posts on this blog are provided “as is” with no warranties and confer no rights. The opinions expressed on this site are mine and mine alone, and do not necessarily represent those of my employer.
Monday, August 21, 2006
The Oceanic model I purchased (used of course) is a vest style with a hard, single tank plastic back plate and an inflation bladder that surrounds it. All-in-all the new BC seems to weigh about 4 pounds more than my old Calypso jacket style that utilized flotation bladders that surrounded you. This last weekend I decided to dive the new BC for the first time.
About an hour’s drive from the house is the Dive Haven Quarry in White, Georgia. The Dive Haven operation just started offering dive services to divers this year, previously we had to dive in Lake Lanier or go to quarries out of state in Tennessee or Alabama or lakes equally far away. In the Dive Haven quarry is an old diesel shovel/crane, it is about a 200 yard surface swim across the quarry then a 20-30 foot dive to the top of the crane arm. My dive buddies and I decided to try an underwater navigation at 20 feet deep (swimming underwater in full dive gear is easier than swimming on the surface.) Once at the crane I would do some photographs while they looked around, then, if air supply and time permitted we would look for the old car in about 20 feet of water nearby, after that we would once again do a 20 foot deep return dive utilizing compass and a sonar transponder I had placed on the dock to easily cross the 200 yards back to where we started.
One additional feature of the Oceanic BC is that it has an integrated weight system. In my old Calypso BC you needed a separate weight belt, which acted as a natural air dam to prevent excessive air in the dry suit from flowing to your feet, the new BC eliminated that. I loaded the Oceanic with 22 pounds of lead (this was what I had dove with using the Calypso and my dry suit) putting two 6 pound shot weights in the front, droppable weight pockets and two 3 pound shot weights in the non-releasable rear pockets. I then put two 2 pound weights in the BC pockets to bring me up to 22 pounds. Unfortunately I forgot to account for the additional 4 pounds of weight the Oceanic itself contributed to the overall weight of my gear and for the reduced profile (and hence reduced buoyancy) between the Oceanic and my Calypso. Looking back I figure I was over weighted by around 6 pounds.
As you can guess that 6 pounds made buoyancy control a nightmare. At the start of the dive you vent all of the air from your BC and dry suit and submerge, if you are properly weighted you will be slightly over weighted at the start of the dive because of the weight of the air in the tank or tanks, and, at the end of the dive just neutral with 500 pounds of air left. Unfortunately I sank like a stone and overshot the 20 foot target depth finally gaining control at 30 feet of depth. With the Calypso I was used to just giving a puff or two of air to halt a descent, of course being over weighted I had to give it quite a blast on top of the air I added to the dry suit to eliminate suit squeeze. Of course I over compensated then shot up to 15 feet or less before halting the rise. Finally I got the buoyancy set near right and we started for the crane.
It wasn’t long before I discovered one of the other joys being over weighted, my SAC rate (air consumption) was too high and the amount of effort I needed to expend to keep up with my dive partners was large. I was also now having to deal with air collecting in my legs and feet (officially called “having floaty feet”) if I put too much in to compensate for dry suit squeeze, it wasn’t a major problem, just one additional thing to deal with. Of course the fins I was using didn’t help matters much, they were older model stiff Scuba Pro’s, non-split, which means they were equivalent to strapping two boards on my feet. So between having to kick like a bee-stung mule and bouncing up and down like a cork because of the dicey buoyancy control I ended up doing the second half of the transit to the crane on the surface doing the back paddle (well, actually the back kick).
We got to the crane and I descended first. Visibility was only about 5 feet so with a descent rate of just under light speed due to being over weighted I nearly crashed into the crane arm having to push off from it as I rocketed past. Arresting my descent 10-15 feet deeper than I planned I then of course over compensated and shot past where I had wanted to stop and begin taking photographs. With reducing oscillations I finally managed to get where I wanted to and take a couple of shots. However, with my limited buoyancy control I was hesitant about going deeper to look over the cab and other parts of the crane since there were still cables and such that would just love to snare an unwary diver.
After taking the shots I felt safe doing I ascended and my dive partners then went down to have a look. By the time they returned we decided to forego the car and just return to the dock. We submerged to 20 feet and began the transit, again with me falling behind (got to replace those darn fins!) and I finished the last third of the transit on the surface once again as I was down to 500 pounds of air by that time.
On the second dive I removed 2 pounds of weight, I was still a bit over weighted but nearly as bad as before. We just puttered around at about 20-30 feet working on buoyancy control. Looks like I should pull at least another 2-4 pounds out to get where I need to be. Darn, looks like I might have to go diving again next weekend…
Thursday, August 03, 2006
According to those folks who specialize in such things a job change can be as stressful as a death in the family. I prefer to think of it as a birth of new possibilities, adventures and opportunities. Much of the job will be learning what the Quest tools do verses those provided by Oracle and other Oracle tool vendors, a lot of experimenting, working with databases, writing white papers and tech sheets and just raw learning. All of the above I enjoy immensely when I have the time to do them and that is supposed to be built into this position.
For those who have a feature they just want to see added to Quest tools, something that just annoys them about an existing tool or any other constructive suggestions for the Oracle (or non-Oracle) quest toolset, send it in to me (email@example.com) and I’ll see to it that it gets to the right person to take action.
I will miss some of the consulting work, the fun of helping folks get the most out of Oracle, the thrill of chasing down that illusive performance issue and the joy of teaching Oracle technologies such as real application clusters to folks in the field. However, there may still be a bit of that going on so it isn’t a complete sea change.
So it is time for the next chapter in my life and time to close the previous one. For those of you who I got to work with or for during the consulting period, thanks for the interesting assignments and work, and yes, I am still available by emails for questions. Hopefully in this next phase of work I will be able to help even more folks learn about Oracle and share even more Oracle knowledge than before.
Note: The opinions expressed on this web page are those of its author and not those of Quest Software, or its affiliates.